ABOUT NULON ENGINE TREATMENT
Nulon Engine Treatment is the greatest innovation
in lubrication technology. This unique formula that contains activated
PTFE (Poly Tetra Fluoro Ethylene, the slipperiest substance known to science) and
other special additives, eliminates friction and smoothens the engine thus
ensuring enhanced performance and total protection which helps in significantly
increasing the life of vehicles.
The major cause of component failure in any lubrication system is heat and wear
& tear caused by friction. When two surface move in opposite directions,
the peaks of the surfaces interact causing an abrasive action resulting in friction.
Also, during normal running of the vehicle the irregular porous surfaces of the
engine get clogged with carbon and sludge leading to loss of power, higher fuel
consumption and increased wear and tear. In order to prevent such damage, using
engine oil alone is not sufficient. The ultra-fine sub-micron particles of
activated PTFE present in Nulon engine oil cleans the surface of all its
impurities and subsequently forms an active and uniform protective film of 0.5
micron on the moving parts of the engine, eliminating friction to a near zero
level and ensuring protection of engine and great benefits that no other engine
oil can offer, allowing the engine to reach its true potential
and deliver a good performance.
HOW DOES NULON ENGINE TREATMENT WORK
- Nulon Engine Treatment is formulated with activated PTFE (Poly
Tetra Fluoro Ethylene) and other special proprietary additives blended into
the base oil. The activated PTFE content in Nulon Engine Treatment is
inert and is not affected by acids, rust, corrosion, minerals, gases and
other negative elements that are formed and found inside the engine.
- The activated PTFE forms an active protective film on all the
engine parts and moving parts of the engine thereby preventing
metal-to-metal contact and enhancing the lubrication by eliminating
friction to near zero levels.
- This film prevents the acid/gases etc. formed during combustion of
adulterated petrol to get in direct contact with the metal surface of the
parts in the engine and thereby preventing the acid from doing any harm to
the metal parts in the engine.
- Protects the engine from the detrimental effects of adulterated
- Average increase in fuel efficiency by 3% - 7%.
- Eliminates friction and subsequently reduces wear and tear inside
the engine, saving downtime and maintenance costs.
- Increases compression, ensuring more power and better pick up.
- Reduces smoke emission levels.
- Reduces noise & vibration.
- Smoother and quicker start-ups.
- Prevents damages to the engine due to cold start-ups.
- Increases the resale value of the vehicle.
- Suitable for application to cars/two-wheelers/SUVs/trucks
- One can of Nulon E-25 Supreme Engine Treatment 50ml is suitable for
all new and used motorcycles and scooters.
LIFE AND AVERAGE COST PER
Each application is effective for 15,000kms or 6
months whichever is achieved earlier. The average cost for two wheelers works
out to one paisa per km.
DIRECTION FOR USE FOR MAXIMUM BENEFITS:-
Step 1 Run engine for some time to
ensure that engine is at normal operating temperature.
Step 2 Turn off or stop the engine once it is at normal operating
Step 3 Shake Nulon Engine Treatment can vigorously for at least
two minutes (as applicable with reference to the kind of vehicle; check
application rates mentioned above).
Step 4 For 4
Stroke engine add contents of the can to the engine oil sum.
Step 4 For 2 Stroke engine add contents of the can to the petrol
tank (there should be at least 2 litres of petrol in the tank).
Step 5 Restart engine.
Step 6 Run/Drive engine for at least 20 minutes after application.